Low Frequency Pure Sine Wave Inverter, Solar Inverter With Charge PSW 5000W
Low frequency pure sine wave combined inverter & charger EP3000 Series 1-3kw:Quiet, high efficiency operation Front panel LED/LCD indicators and adjustable switch selectors Selectable settings for flooded lead acid, gel, or absorbed glass mat (AGM) batteries.Main for home and office Appliance such as TV,refrigerator,fan,lights,computer etc.
Features:
1.High overload ability of our APS charger is up to 300% rated power(20 sec.), and low voltage trip 9.5V/10V or 10V/10.5V is selectable.
2.APS pure sine wave inverter adopts low quiescent current, and power saver mode to reduce power consumption to 10W(3s sensing cycle)/3W(30s sensing cycle) *. It can extract max. power from various batteries with different protections.
3.The automatic voltage regulator supplies wide stabilizing AC range, and bucking/boosting voltage in 10ms.
4.Our low frequency pure sine wave inverter can offer 3-step intelligent battery charging, and equipped with 8 preset battery type selector for totally flat batteries. Its powerful charge rate up to 90Amp**. In addition, PFC(power factor correction) is adopted for charger, which has less power consumption than conventional units
5.10ms typical transfer time between battery and AC, which guarantees power continuity of low frequency pure sine wave inverter. Its input AC voltage is selectable (184-253V or 154-253V) for different kinds of loads.
6.The low frequency inverter charger has 15s delay before transfer when AC resumes, and the function of overload protection when it equips with generator. Also, it allows start up and through power with depleted batteries.
7.USB communication port, LCD status display, battery/AC priority switch are available for ourlow frequency pure sine wave inverter, it also has 17 alarms/warnings for easier operation and trouble-shooting, and ability to switch the unit on/off. In addition, select/deselect power saver mode can be used too.
Technical data:
Low frequency pure sine wave combined inverter & charger EP3000 Series 1-3kw:Quiet, high efficiency operation Front panel LED/LCD indicators and adjustable switch selectors Selectable settings for flooded lead acid, gel, or absorbed glass mat (AGM) batteries.Main for home and office Appliance such as TV,refrigerator,fan,lights,computer etc.
Features:
1.High overload ability of our APS charger is up to 300% rated power(20 sec.), and low voltage trip 9.5V/10V or 10V/10.5V is selectable.
2.APS pure sine wave inverter adopts low quiescent current, and power saver mode to reduce power consumption to 10W(3s sensing cycle)/3W(30s sensing cycle) *. It can extract max. power from various batteries with different protections.
3.The automatic voltage regulator supplies wide stabilizing AC range, and bucking/boosting voltage in 10ms.
4.Our low frequency pure sine wave inverter can offer 3-step intelligent battery charging, and equipped with 8 preset battery type selector for totally flat batteries. Its powerful charge rate up to 90Amp**. In addition, PFC(power factor correction) is adopted for charger, which has less power consumption than conventional units
5.10ms typical transfer time between battery and AC, which guarantees power continuity of low frequency pure sine wave inverter. Its input AC voltage is selectable (184-253V or 154-253V) for different kinds of loads.
6.The low frequency inverter charger has 15s delay before transfer when AC resumes, and the function of overload protection when it equips with generator. Also, it allows start up and through power with depleted batteries.
7.USB communication port, LCD status display, battery/AC priority switch are available for ourlow frequency pure sine wave inverter, it also has 17 alarms/warnings for easier operation and trouble-shooting, and ability to switch the unit on/off. In addition, select/deselect power saver mode can be used too.
Technical data:
| Type: | DX2000W | DX3000W | DX5000W | DX6000W | DX8000W | DX10000W | ||||
| DC12V | DC24V | DC48V | DC12V | DC24V | DC48V | DC48V | DC48V | DC96V | DC96V | |
| 1.AC Mode Specifications: | ||||||||||
| Input wave form | pure sine wave | |||||||||
| Input voltage | 220Vac | |||||||||
| Low voltage cut off | 145Vac±4% | 165Vac±4% | ||||||||
| Low voltage recover | 155Vac±4% | 175Vac±4% | ||||||||
| High voltage cut off | 285Vac±4% | 265Vac±4% | ||||||||
| High voltage recover | 275Vac±4% | 255Vac±4% | ||||||||
| Frequency | 50Hz/60Hz(Atomatic detection) | |||||||||
| Output wave form | pure sine wave | |||||||||
| Overload protection | alarm | |||||||||
| Short circuit protection | trip | |||||||||
| Efficiency | >95% | |||||||||
| Transfer current | 30A | 60A | ||||||||
| Transfer time DC TO AC | 10ms | |||||||||
| Transfer time AC TO DC | 10ms | |||||||||
| 2.Inverter Mode Specifications: | ||||||||||
| Rated power | 2000W | 3000W | 5000W | 6000W | 8000W | 10000W | ||||
| Power factor | 0~1.0 | |||||||||
| Output voltage | 220Vac | |||||||||
| Frequency | 50Hz ± 0.3Hz | |||||||||
| Automatic tracking the main frequency | Yes(start from the first connection)50Hz @48-54Hz/ 60Hz @58-64Hz | |||||||||
| Inputvoltage range | ±10% rms | (-25%/+20%) rms | ||||||||
| Efficiency | >80% | |||||||||
| Overload protection | (110%<load<125%) ±10%: 30S cut off output voltage | |||||||||
| (SMPS load) | (125%<load<150%) ±10%:cut off output voltage at once | |||||||||
| Peak Capacity | 4000VA | 6000VA | 10000VA | 12000VA | 16000VA | 20000VA | ||||
| Short circuit protection | Yes | |||||||||
| Input voltage | 12V/24V/48V/96V | |||||||||
| Min DC voltage | 10V/20V/40V/80V | |||||||||
| Undervoltage warning | 10.5Vdc ± 0.3Vdc (12V battery)/42Vdc±1.2Vdc(48V battery) | |||||||||
| 21.0Vdc ± 0.6Vdc (24V battery)/84Vdc±2.4Vdc(96V battery) | ||||||||||
| DC input too low, | 10.0Vdc ± 0.3Vdc(12V battery)/40.0Vdc±1.2Vdc(48V battery) | |||||||||
| Automatic cut off | 20.0vdc± 0.6Vdc (24V battery)/80.0Vdc±2.4Vdc(96V battery) | |||||||||
| input voltage warning &cut off | 15Vdc ± 0.3Vdc (12V battery)/30Vdc ± 0.6Vdc(24V battery) | |||||||||
| 60Vdc±1.2Vdc(48V battery)/120Vdc±2.4Vdc(96V battery) | ||||||||||
| Save power | load≤25W | |||||||||
| 3.Charger Mode Specifications: | ||||||||||
| Chargering current | 50A | 25A | 15A | 50A | 25A | 15A | 15A | 15A | 15A | 15A |
| Chargering current correction | ± 5Adc | |||||||||
| Battery initial voltage | 0 -13.7 Vdc | |||||||||
| Charger short circuit protection | trip | |||||||||
| Overcharger protection | V ≥14.7Vdc / 30.4Vdc, every half second sounds | |||||||||
| 4.Charging Rules: | ||||||||||
| Three Phases | constant current chargering →constant voltage phase →float | |||||||||
| 5.Monitor | ||||||||||
| Computer Monitor | RS232 | |||||||||
| 6.Protection | ||||||||||
| Low Voltage | LCD show low battery alarm | |||||||||
| High Voltage | alarm | |||||||||
| Inverter Mode overload | shut-down protection | |||||||||
| Over Temperature | Heatsink temperature.≥90°C,shut-down protection | |||||||||
| 7.Physical | ||||||||||
| Operate Temperature Range | 0°C to 40°C | |||||||||
| Store Temperature | -15ºC ~ 60ºC | |||||||||
| Operate Humidity | 5% to 95% | |||||||||
| Noise | 60dB max | |||||||||
| Cooling | fan in ventiltation conditions | |||||||||
| Dimension(L*H*W) | 450*215*180MM | 450*215*180MM | 620*215*180MM | 310*610*520MM | ||||||
| N.W (KG) | 20KG | 20KG | 20KG | 24KG | 24KG | 24KG | 44KG | 46KG | 80KG | 90KG |